Tex»Pro Replacement Part - Front & Rear Gasket
Item #TP1008
Description
TexPro replacement parts are now available online! Not sold in stores.
Up to 70% faster1 and 60% lighter2 than a traditional hopper gun, HOMAX Tex»Pro™ Texture System makes a tough job simple. This TexPro replacement part kit includes (2) Front Gaskets & (2) Rear Gaskets. Faster >> Lighter >> Better. A Simpler Texture System2.
1Setup and cleanup time for HOMAX TEXPRO vs. hopper gun
2HOMAX TEXPRO vs. full hopper gun
Related Products
Details
Directions
Reviews
Details
Routine maintenance and parts replacement is essential to maintain the sprayer for safe and proper operation. Front gasket should be replaced when damaged, when air leaks from front cap, or when spray cycles on and off. Rear gasket should be replaced when damaged, when air leaks from rear hatch, or when texture will no longer spray. This TexPro replacement part kit includes:
•(2) Front Gaskets•(2) Rear Gaskets
Directions
WARNING: BEFORE HANDLING THE TEXTURE SPRAYER OR WHEN YOU STOP SPRAYING OR ARE REMOVING ANY EQUIPMENT PARTS:
1.SHUT OFF AIR SOURCE AT AIR COMPRESSOR.2.DISCONNECT AIR COMPRESSOR POWER SOURCE.
Front Gasket
1.Remove front gasket from case2.Unlatch front cap
3.Remove cap from hinge
4.Install front gasket
5.Press firmly into groove
6.Replace cap and close latch
Rear Gasket
1.Remove rear gasket from case2.Open back cap
3.Install gasket in groove inside rear cap
4.Press firmly into groove
5.Close and latch rear cap