0 0 19.97 New USD Homax PPG Arch Coatings Wet Look Cure Seal Gallon Model: 0613 Product ID: 0613 Homax Clear Wet Look Cure Seal provides high-gloss sheen to concrete, exposed aggregate, unglazed tile, slate, brick driveways, patios and kitchen floors. The professional grade formulation improves dull and drab appearance, providing natural "wet look" that resists yellowing. Non-flammable, low odor formula is easy-to-use. 1 gallon 0613

Wet Look Cure Seal Gallon

Item #0613


$19.97

Free Shipping

On All Orders

Quantity Discounts

4-8 $18.69 | 9+ $17.80 | High Volume


Description

Homax® Clear Wet Look Cure Seal provides high-gloss sheen to concrete, exposed aggregate, unglazed tile, slate, brick driveways, patios and kitchen floors. The professional grade formulation improves dull and drab appearance, providing natural "wet look" that resists yellowing. Non-flammable, low odor formula is easy-to-use. 1 gallon

Details

Directions

Reviews

Details

Many homeowners are unaware that sealing concrete goes a long way towards protecting it from grease, chemicals and environmental hazards, plus making it easier to clean and improving the appearance.

Homax® Clear Wet Look Cure Seal provides high-gloss sheen to concrete, exposed aggregate, unglazed tile, slate, brick driveways, patios and kitchen floors. The professional grade formulation improves dull and drab appearance, providing a fresh look to the surface. The clear finish slightly darkens surfaces for a natural "wet look" that resists yellowing. Non-flammable, low odor formula is easy-to-use.

Homax Clear Wet Look Cure Seal helps surfaces resist penetration of auto oil, grease, rust, water stains, reducing stains. Tough and abrasion resistant sealer helps eliminate spalling (freeze-thaw), concrete dusting and even reduces efflorescence. The non-flammable, low odor formula is easy for homeowners to use. Ready for light traffic in 8 hours, heavy traffic in 24 hours. Reapply every 1-3 years depending on traffic and wear. Great for driveways, patios and floors. 1 gallon size.

  • Cures and seals fresh concrete
  • Beautifies & protects from oil, rust & water
  • Resists hot tire pickup
  • Repels oils, rust, water & stains
  • Brightens & protects
  • Interior & Exterior
  • Water-based
  • Low odor, non-flammable
  • 1 gallon
Use On:
  • Concrete
  • Exposed Aggregate
  • Unglazed Tile
  • Slate
  • Brick
  • Old or New Concrete
  • Brick
  • Terrazzo
  • Flagstone
  • Quarry Tile
  • Patio
  • Driveways
  • Walkways
  • Stepping Stones
  • Carports
  • Garage Floors & Entryways

COVERAGE: Sq.Ft./GL.

  • Smooth Concrete, Brick: 300-400 SQ.FT
  • Exposed Aggregate: 150-250 SQ.FT
  • Rough Concrete: 150-250 SQ.FT
  • Slate, Terrazzo: 400-500 SQ.FT
  • Unglazed Tile: 250-300 SQ.FT
  • Flagstone, Saltillo: 100-125 SQ.FT

Homax® - Creating Better Homes®

Directions

ALWAYS TEST IN A SMALL INCONSPICUOUS AREA TO SEE IF RESULTS ARE SATISFACTORY.

Do not dilute with any type of thinner. Do not apply when surface or air temperature is below 50 ºF or above 90 ºF. Do not allow to freeze before use. Do not apply to non-porous surfaces... test with drop of water, if it is not absorbed the surface is not porous.

APPLY WITH:

  • SPONGE
  • SPONGE MOP
  • ROLLER
  • BRUSH
  • LOW PRESSURE AIRLESS SPRAYER

TO APPLY ON:

  • OLD CONCRETE
  • EXPOSED AGGREGATE
  • BRICK
  • UNGLAZED TILE
  1. Remove all paint, wax, dirt, dust, oil or grease and rinse thoroughly with water. Allow to dry. If an acid has been used to clean, neutralize with baking soda and water solution and rinse thoroughly with water.
  2. Apply two light coats evenly to dry surface, waiting 1-3 hrs. between coats and until the surface is dry to the touch.
  3. Avoid puddling, wipe off excess. More coats can be applied for a higher gloss finish

TO APPLY ON FRESH CONCRETE:

As a curing agent for fresh concrete, making concrete stronger and less likely to crack. After final troweling, all surface water has evaporated, and surface can support your weight, apply one coat to control moisture loss.

TO APPLY ON NEW CONCRETE:

Allow concrete to cure for 30 days before applying Cure Seal as a sealer.

CLEAN UP:

Tools clean up with water when wet.

COVERAGE: Sq.Ft./GL.

  • Smooth Concrete, Brick: 300-400 SQ.FT
  • Exposed Aggregate: 150-250 SQ.FT
  • Rough Concrete: 150-250 SQ.FT
  • Slate, Terrazzo: 400-500 SQ.FT
  • Unglazed Tile: 250-300 SQ.FT
  • Flagstone, Saltillo: 100-125 SQ.FT

Reapplication can be made at any time when surface is dry for a higher luster.

Ready for light traffic in 8 hours, heavy traffic in 24 hours. Reapply every 1-3 years depending on traffic and wear.

CAUTION: Contains Acrylic Polymer Emulsion. Causes eye, skin and respiratory tract irritation. Avoid contact with skin and eyes. Avoid breathing spray mists. Wear safety glasses or goggles and rubber gloves when handling. Use with adequate ventilation.

FIRST AID: In case of eye contact, immediately flush eyes with water for 15 minutes. Get medical attention if irritation persists. If swallowed, get medical attention immediately. If on skin, rinse thoroughly with water.

KEEP OUT OF REACH OF CHILDREN.

VOC CONTENT < 100 g/L (< 0.83 lbs/gal)

 WARNING: Reproductive Harm - www.P65Warnings.ca.gov.

Reviews