Premixed Popcorn Ceiling Texture, 2.2L
Item #8522
Description
Homax® Pre-Mixed Popcorn Ceiling Texture is ready for any patch and repair project or new texture application. It comes pre-mixed in a ready-to-use bottle that acts as a hopper. Simply snap Homax Pre-Mixed Popcorn Ceiling Texture to any hopper or spray gun to apply a popcorn texture to your ceiling. There is no mixing required and it covers up to 50 sq. ft. Once dry, the texture is paintable and sandable. The 2.2L. bottle is resealable to keep product fresh for the next task.
Details
Directions
Reviews
Details
Watermarks or other damage to your popcorn ceiling can be an eyesore, altering the appearance of the room. Homax® makes it easy to quickly repair popcorn ceilings with our popular texture products.
Homax Pre-Mixed Popcorn Ceiling Texture is ready for any patch and repair project or new texture application. It comes pre-mixed in a ready-to-use bottle that acts as a hopper. Simply snap Homax Pre-Mixed Popcorn Ceiling Texture to any hopper or spray gun to apply a popcorn texture to your ceiling. There is no mixing required and it covers up to 50 sq. ft. Once dry, the texture is paintable and sandable. The 2.2L bottle is resealable to keep product fresh for the next task.
- Pre-mixed, ready-to-use popcorn (acoustic) texture
- Use with any hopper or spray gun
- Paintable and sandable
- Resealbe bottle
- Covers up to 50 sq. ft.
- 2.2L
Where To Use
Homax Pre-Mixed Popcorn Ceiling Texture can be used on ceilings where a popcorn (acoustic) texture is desired. Use it for repairs or to apply new texture.
How To Use
Simply snap Homax Pre-Mixed Popcorn Ceiling Texture to any hopper or spray gun to apply a popcorn texture to your ceiling. There is no mixing required and it covers up to 50 sq. ft. Once dry, the texture is paintable and sandable. Please see complete instructions for use on the product label.
Directions
Important: Puncture hole and keep unclogged. A Blocked hole could result in injury.
- Clean surface thoroughly. Prime new drywall. Seal water stains.
- Apply in temp. above 55°F.
- Shake well, puncture bottle under breather cap (use Phillips screwdriver).
- Read texture gun manual for setting and application instructions.
- If necessary, thin sparingly with water.
- Allow chips to build up for best coverage.
- Clean up with warm water.
- Let dry 24 hrs. if painting. Dries white.
CAUTION: CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION.
Contains Calcium Carbonate, Mica, Perlite, Titanium Dioxide and Quartz. Use with adequate ventilation during spray application. Do not breathe dust or spray mist. Avoid contact with eyes and skin. Wear safety glasses or goggles and gloves. If properly used, a respirator may offer additional protection. Follow respirator manufacturer’s directions for proper use. Wash hands after using.
FIRST AID: In case of eye contact, immediately flush eyes with water for 15 minutes. Get medical attention. If on skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately. In case of respiratory difficulty, move to fresh air and get medical attention.
KEEP OUT OF REACH OF CHILDREN.
WARNING: Cancer - www.P65Warnings.ca.gov.