On All Orders
4-8 $5.99 | 9+ $3.99 | High Volume
Glazing metal, wood, aluminum, painted or unpainted glass, plexiglass and acrylic sheeting. Also recommended as an adhesive sealant for bedding glass or plastic in wood or metal.
NOT Recommended For:
Applications below the water line, aquariums, on top of silicone, or over wet or green lumber.
Using a 1/4" (.64 cm) bead: 10.3 fl. oz. cartridge covers 30 lineal ft.
This product cannot ship to Hawaii or Alaska.
Remove any old window caulk, glazing, putty, adhesive sealant or peeling paint. Clean rusted surfaces by wire brushing and prime with rust-preventive primer. No primer is needed on clean, bare wood. GC-17 glaze and adhesive sealant should only be applied in dry weather at temperatures above 40°F. Do not use this glaze and adhesive sealant when rain is expected within 24 hours.
Load GC-17 cartridge into standard caulk gun. Puncture inner seal with nail or wire. Apply GC-17 glazing compound and adhesive sealant directly to glazing area with uniform pressure.
Paintable with oil or latex paint after one hour drying time. Under humid conditions drying time might be extended.
Dries in 24 hours.
Use soap and water to clean up GC-17 while wet. For dried adhesive sealant, scrape or cut away.