0 0 9.69 New USD Homax PPG Arch Coatings Roof Repair (RR-808) Model: 407690 Product ID: 407690 A tough, flexible pro caulk and adhesive sealant, Roof Repair may even be applied in rain or snow to stop leaks fast around chimneys, flashings, roof decks, vents and other roof areas. Recommended for: bonding loose shingles and sealing leaks and openings around chimneys, flashings, roof decks, vents, copings and parapet walls. 407690

Roof Repair (RR-808)

Item #407690


$9.69

Free Shipping

On All Orders

Quantity Discounts

4-8 $7.49 | 9+ $5.49 | High Volume


Description

A tough, flexible pro caulk and adhesive sealant, Roof Repair may even be applied in rain or snow to stop leaks fast around chimneys, flashings, roof decks, vents and other roof areas.

Recommended for: bonding loose shingles and sealing leaks and openings around chimneys, flashings, roof decks, vents, copings and parapet walls.

Details

Directions

Reviews

Details

Key Features
  • May be applied in rain or snow
  • Tough and flexible
  • Seals leaks in all weather
  • Prevents ice and water damage

Recommended For:
Bonding loose shingles and sealing leaks and openings around chimneys, flashings, roof decks, vents, copings and parapet walls.

NOT Recommended For:
Interior use and uses other than roof sealing and repair.

Coverage
Using a 1/4" (.64 cm) bead: 10.1 fl. oz. cartridge covers 30 lineal ft.

Max VOC
258 GPL

Specifications
Federal Specification SS-C-153 Type I

This product cannot ship to Hawaii or Alaska.

Directions

Surface Preparation
Clean surface as much as possible under existing weather conditions before applying this product. Fill any deep joints with solid filler to within 1/2" of surface. Apply this high temperature adhesive at temperatures above 32°F. For easier gunning in cold weather, sealant should be conditioned to room temperature prior to use.

Product Application
Load RR-808 cartridge into standard caulk gun. Cut nozzle at 45° angle for desired bead size (marked on nozzle). Puncture inner seal with nail or wire. Push RR-808 sealant as far as possible into gap using firm, uniform pressure. Apply sufficient sealant to leave a bead of at least 1/4" around repaired and sealed surface. Level any excess sealant with a trowel or putty knife. Let dry 24 hours.

Drying Time
Dries in 24 hours.

Cleanup
Use mineral spirits.

Reviews