0 0 8.99 New USD Homax PPG Arch Coatings Polyurethane Construction Adhesive (LN-950) Model: 407720 Product ID: 407720 This polyurethane construction adhesive offers excellent weather resistance and low-temperature flexibility for a strong bond both indoors and outdoors and on a wide range of materials and surfaces.Recommended for: bonding building materials (concrete, lumber, etc.) to subfloors, tileboard, treated lumber, cabinets, foamboard, countertops, granite, marble, drywall, ceramics, mirrors, plastic, vinyl, 1/8" MDF paneling, brick veneers, plywood and waferboard. 407720

Polyurethane Construction Adhesive (LN-950)

Item #407720


$8.99

Free Shipping

On All Orders

Quantity Discounts

4-8 $6.99 | 9+ $4.99 | High Volume


Description

This polyurethane construction adhesive offers excellent weather resistance and low-temperature flexibility for a strong bond both indoors and outdoors and on a wide range of materials and surfaces.

Recommended for: bonding building materials (concrete, lumber, etc.) to subfloors, tileboard, treated lumber, cabinets, foamboard, countertops, granite, marble, drywall, ceramics, mirrors, plastic, vinyl, 1/8" MDF paneling, brick veneers, plywood and waferboard.

Details

Directions

Reviews

Details

Key Features
  • Wide range of materials
  • Works in temperatures from -40*F to 300*F
  • Will not harm any surface
  • Permanent, waterproof bond
  • All-weather formula
  • Contributes toward NAHB National Green Building Standard™ certification of the structure

Recommended For:
Bonding building materials (concrete, lumber, etc.) to subfloors, tileboard, treated lumber, cabinets, foamboard, countertops, granite, marble, drywall, ceramics, mirrors, plastic, vinyl, 1/8" MDF paneling, brick veneers, plywood and waferboard.

NOT Recommended For:
Ceiling tile.

Coverage
Using a 1/4" (.64 cm) bead: 10 fl. oz. cartridge covers 30 lineal ft.

Max VOC
115 GPL

Specifications
ASTM C-557 and ASTM D-3498

This product cannot ship to Hawaii or Alaska.

Directions

Surface Preparation
Surfaces must be clean, structurally sound and free of loose particles before applying construction adhesive. For smooth surfaces, adhesion can be improved by lightly sanding bond areas prior to applying construction adhesive. Wear gloves when using this construction adhesive.

Product Application
Insert cartridge of construction adhesive into a standard caulk gun and puncture inner seal with a nail or wire. Apply a 1/4" wide bead of construction adhesive to one of the surfaces to be bonded. Join the surfaces together within 30 minutes and press firmly so that the construction adhesive is 1/16" to 1/8" in thickness. Use mechanical fasteners or bracing to hold surfaces together until the construction adhesive has set (about 8 to 12 hours, depending on temperature, humidity and porosity of the surfaces). Do not use this construction adhesive at temperatures below 40° F.

Drying Time
Construction adhesive will normally dry within 8 to 12 hours. Actual dry time may vary with temperature, humidity and materials used.

Cleanup
If the construction adhesive is wet, use mineral spirits or toluene. If the construction adhesive has dried, scrape it away.

Reviews