0 0 11.47 New USD Homax PPG Arch Coatings Marble & Granite Adhesive, 10 oz (LN-933) Model: 407716 Product ID: 407716 Liquid Nails® Marble & Granite Adhesive, LN-933, is a polyurethane construction adhesive formulated for a wide range of temperatures and moisture conditions for a strong bond in any room in the house, or outside. Formulated for adhering marble, granite, quartz, solid surfaces and other similar materials to most common construction materials. 407716

Marble & Granite Adhesive, 10 oz (LN-933)

Item #407716


$11.47

Free Shipping

On All Orders

Quantity Discounts

4-8 $9.97 | 9+ $7.97 | High Volume


Description

Liquid Nails® Marble & Granite Adhesive, LN-933, is a polyurethane construction adhesive formulated for a wide range of temperatures and moisture conditions for a strong bond in any room in the house, or outside. Formulated for adhering marble, granite, quartz, solid surfaces and other similar materials to most common construction materials.


Details

Directions

Reviews

Details

Recommended For bonding marble, granite, cultured and engineered stone to:

  • Marble
  • Granite
  • Cultured Stone
  • Engineered Stone
  • Quartz
  • Solid Surface Materials

 

Not Recommended For:

  • Flooring applications
  • Underwater applications
Please research all installation instructions and read entire label for safety, health & environmental information prior to use.

 

Product Advantages:

  • Will not stain
  • Heat & Water resistant
  • Ideal for solid surfaces
  • High strength bond
  • Interior & Exterior
  • Exceeds ASTM C-557 specifi cations
  • 100% Satisfaction Guaranteed
  • VOC Compliant

This product cannot ship to Hawaii or Alaska.

Directions

Surface preparation:
Surfaces must be clean, dry, structurally sound and free of loose paint or other materials.

  1. Sand and roughen high-gloss paint
  2. Cut nozzle at a 45° angle to a 1/4" bead size
  3. Puncture inner seal with nail or wire

 

Applying The Product:
Countertops: Apply a 1/4" continuous bead to contact areas. Press fi rmly into place. Backsplashes, baseboards and window sills: Apply a zigzag 1/4" bead to each material to be bonded. Press materials fi rmly into place. Bracing is recommended for vertical applications; 12 hours.
*Solid surface materials i.e. Corian® or Wilsonart®: Lightly sand areas where you will be applying the adhesive. Then apply a 1/4" bead around the perimeter of the surface to be joined. Press fi rmly into place. Bracing is recommended for vertical applications; 12 hours.

Clean-up:
Use mineral spirits for wet adhesive. Scrape off dry material.

Disposal:
Contains organic solvents which may cause adverse effects to the environment if disposed of improperly. Place empty containers in normal refuse for disposal. Contact your sanitation department or household hazardous waste coordinator for information concerning possible re-use or disposal of unused solvent-containing adhesives and/or sealants.

 WARNING: Cancer - www.P65Warnings.ca.gov.

Reviews