0 0 8.99 New USD Homax PPG Arch Coatings Landscape Block, Stone & Timber Adhesive (LN-905) Model: 407711 Product ID: 407711 Great as a low garden wall adhesive, this tough, fast-bonding adhesive can fuse stone, brick and timber into one super-strong structure that resists shifting and loosening due to seasonal changes.Recommended for: bonding and repairing brick, concrete, stone and timber, including use as a wall adhesive for retaining walls and landscape applications such as garden walls, planters, walkways, steps and capstones. 407711

Landscape Block, Stone & Timber Adhesive (LN-905)

Item #407711


$8.99

Free Shipping

On All Orders

Quantity Discounts

4-8 $6.99 | 9+ $4.99 | High Volume


Description

Great as a low garden wall adhesive, this tough, fast-bonding adhesive can fuse stone, brick and timber into one super-strong structure that resists shifting and loosening due to seasonal changes.

Recommended for: bonding and repairing brick, concrete, stone and timber, including use as a wall adhesive for retaining walls and landscape applications such as garden walls, planters, walkways, steps and capstones.

Details

Directions

Reviews

Details

Key Features
  • Prevents shifting when used as a garden wall adhesive between landscape blocks
  • Repairs brick and stone hazards
  • Weatherproof bond
  • 15-minute open time for proper placement and adjustment of block and stone
  • VOC-compliant
  • Contributes to LEED® certification
  • Contributes toward NAHB National Green Building Standard™ certification of the structure
  • GREENGUARD Gold Certification
  • Fast-bonding adhesive

Recommended For:
Bonding and repairing brick, concrete, stone and timber, including use as a wall adhesive for retaining walls and landscape applications such as garden walls, planters, walkways, steps and capstones.

NOT Recommended For:
NOT for use in water immersion applications. Note: When creating structures higher than 3 feet in height, consult block manufacturer for specific construction instructions.

Coverage
Using a 3/8" (10mm) bead: 10 fl. oz. cartridge covers 14 lineal ft.

Max VOC
20 GPL

Specifications
APA AFG-01, ASTM C 557

This product cannot ship to Hawaii or Alaska.

Directions

Surface Preparation
Surfaces should be clean and dry at time of adhesive application.

Product Application
Insert wall adhesive cartridge into caulk gun. Cut the tip on the nozzle at a 45° angle for a desired bead size of 1/4" or 1/2". Puncture seal inside the nozzle where the nozzle meets the cartridge with a long nail or wire. Apply the wall adhesive to the underlying block that the next course or cap stones will be glued onto. The wall adhesive should be applied in a bead 1/2" from edge along the front and along the back of the block. Install the cap stones or block within ten minutes after the wall adhesive has been applied.

Note
Do not allow traffic on stairs or use of walls for 16 hours after application of wall adhesive. Do not apply to wet surfaces.

Drying Time
Working time 15 minutes. Fully cured in 1 week.

Cleanup
If the wall adhesive is wet, use water. If the wall adhesive has dried, scrape it away, then remove residue using a cloth dampened with mineral spirits.

Reviews