0 0 9.99 New USD Homax PPG Arch Coatings Heavy Duty Construction Adhesive, Quart (LN-903) Model: 407704 Product ID: 407704 This construction adhesive is specially formulated to provide professionals and do-it-yourselfers with excellent exterior/interior adhesion. It's also considered a ""green glue"" because it is low-VOC. 407704

Heavy Duty Construction Adhesive, Quart (LN-903)

Item #407704


$9.99

Free Shipping

On All Orders

Quantity Discounts

4-8 $7.99 | 9+ $5.99 | High Volume


Description

This construction adhesive is specially formulated to provide professionals and do-it-yourselfers with excellent exterior/interior adhesion. It's also considered a "green glue" because it is low-VOC.


Details

Directions

Reviews

Details

Key Features
  • Exceptional holding power
  • Excellent gap filling
  • VOC-compliant "green glue"
  • 20-minute open time
  • Contributes to LEED® certification
  • Contributes toward NAHB National Green Building Standard™ certification of the structure

Recommended For:
Many exterior and interior heavy duty applications including countertops, cabinets, brick veneer, plywood and waferboard, foil insulation board, tileboard, treated lumber, drywall and most common building materials (concrete, lumber, etc.).

NOT Recommended For:
Flooring applications, ceramics, mirrors, granite, marble, plastic or vinyl.

Coverage
Using a 1/4" (.64 cm) bead: 28 fl. oz. cartridge covers 88 lineal ft. Using a 1/4" (.64 cm) bead: 10 fl. oz. cartridge covers 30 lineal ft. 1 Gal. can covers 60 to 90 sq. ft. 1 Quart can covers 15 to 22 sq. ft.

Max VOC
70 GPL

Specifications
ASTM C-557

This product cannot ship to Hawaii or Alaska.

Directions

Surface Preparation
For best results, construction adhesive and both surfaces should be above 60°F. All substrates must be structurally sound and free from grease, dust, dirt and flaking coatings. New plaster must be fully cured before applying construction adhesive.

Application Prep
Cut nozzle at a 45° angle to desired size. Puncture inner seal with nail or wire.

Walls
Apply 1/4" bead of construction adhesive directly onto studs and plates. Press drywall firmly against construction adhesive. Adjust as necessary. Holding drywall's outer edges, nail every 16" and inside the field as necessary. Note: If studding is perfectly true, nailing inside field will not be required.

Ceilings
Apply 1/4" bead of construction adhesive to rafters. Fasten drywall's outer edges with nails 12" on center. Fasten center of field with a nail at each rafter. Drywall larger than 4' x 8' should be fastened with 2 nails in the field of each rafter.

Laminating
Apply 1/4" bead of construction adhesive to structure. Some uses include drywall to drywall and drywall to block walls.

Drying Time
Working time: Up to 20 minutes. Very warm temperatures will decrease working time. If construction adhesive becomes dry, scrape it off and reapply.

Cleanup
If the construction adhesive is wet, use soap and water. If the construction adhesive has dried, use mineral spirits.

Reviews