0 0 8.59 New USD Homax PPG Arch Coatings Extreme Heavy Duty Construction Adhesive (LN-907) Model: 414607 Product ID: 414607 Extreme Heavy Duty Construction Adhesive is an interior/exterior grade, low-solvent, high-strength construction adhesive designed to provide outstanding adhesion and durability in bonded assemblies. The extreme formula touts the ability to perform in extreme conditions, bonding in temperatures from 22⁰ F to 120⁰ F. This enables professional contractors and avid DIY-ers to work in the extreme heat or cold and get their job done regardless of the weather. Recommended for: many exterior and interior heavy duty applications including Plywood, Waferboard, Cementboard, Particleboard, Treated Lumber, Drywall, Brick Veneers (Interior Only), Imitation Stone (Interior Only), Tileboard, Foamboard, Ceiling Tiles and most common building materials (concrete, lumber, etc.). 414607

Extreme Heavy Duty Construction Adhesive (LN-907)

Item #414607


$8.59

Free Shipping

On All Orders

Quantity Discounts

4-8 $6.49 | 9+ $4.49 | High Volume


Description

Extreme Heavy Duty Construction Adhesive is an interior/exterior grade, low-solvent, high-strength construction adhesive designed to provide outstanding adhesion and durability in bonded assemblies. The extreme formula touts the ability to perform in extreme conditions, bonding in temperatures from 22⁰ F to 120⁰ F. This enables professional contractors and avid DIY-ers to work in the extreme heat or cold and get their job done regardless of the weather.

Recommended for: many exterior and interior heavy duty applications including Plywood, Waferboard, Cementboard, Particleboard, Treated Lumber, Drywall, Brick Veneers (Interior Only), Imitation Stone (Interior Only), Tileboard, Foamboard, Ceiling Tiles and most common building materials (concrete, lumber, etc.).

Details

Directions

Reviews

Details

Key Features
  • Bonds in extreme temperatures (22⁰ F to 120⁰ F)
  • 200% stronger than fasteners alone
  • Low solvent, high-strength formula
  • Outstanding adhesion and durability
  • All-season performance, no down time
  • Contributes to LEED® certification
  • GREENGUARD Gold Certification
  • Contributes toward NAHB National Green Building Standard™ certification of the structure

Recommended For:
Many exterior and interior heavy duty applications including Plywood, Waferboard, Cementboard, Particleboard, Treated Lumber, Drywall, Brick Veneers (Interior Only), Imitation Stone (Interior Only), Tileboard, Foamboard, Ceiling Tiles and most common building materials (concrete, lumber, etc.).

NOT Recommended For:
Plastics, vinyl, ceramics, mirrors, granite, marble installing tileboard directly to studding, and wood or laminate flooring.

Coverage
Using a 1/4" (.64 cm) bead: 10 fl. oz. cartridge covers 30 linear ft.

Max VOC
18 GPL

Specifications
Passes APA AFG-01 and ASTM C-557

This product cannot ship to Hawaii or Alaska.

Directions

Surface Preparation
Surfaces must be clean, dry and structurally sound. Paneling must be conditioned per Manufacturer’s instructions. Research all installation instructions and read label for safety, health, and environmental information. Place in caulk gun, cut nozzle, and puncture inner seal with nail or wire.

Cabinets and Countertops:
Apply ¼” bead to contact areas. Press into place. Mechanical fasteners must also be used for wall cabinets.

Furring Strips or Studs:
Apply ¼” zigzag bead to each strip or stud. Press into place. Use nails at top and bottom.

Drywall:
Apply ¼” zigzag bead to each stud. Press drywall into place. Position panels so that edges meet at stud center. Nail as required.

Subfloors:
Apply ¼” bead to joists. Press subflooring into place and nail or screw every six inches around panel perimeter and every 12” into joists in field of the panel.

Reviews