0 0 8.24 New USD Homax PPG Arch Coatings Porcelain Chip Fix, White Model: 2164 Product ID: 2164 Homax Porcelain Chip Fix repairs unsightly chips and  scratches on porcelain coated metal, ceramic and enamel. Two-part epoxy and self-leveling formula produces a high gloss, porcelain-like finish. Easy-to-use .Contains 1 vial of epoxy (.12 fl. oz.) and 1 vial of hardener (.06 fl. oz.). White. 2164
Porcelain Chip Fix two part epoxy
5
Hello, How many different color you have and if is only white with what kind color I can mix this one, Thank you
Good so far
4
I applied the epoxy and it is a bit raised over the porcelain. I wasn't sure about whether I could sand it or not. I chatted with customer care and they were very specific: use 220 grit wet after 72 hours of curing. That should be on the product or on the website.
Use with refinishing kit
2
It's not clear on the instructions how long you must wait before applying the Homax Tough Tile tub and sink refinishing kit. Neither kit specifies this, although there is an obvious interplay in the products.
Great stuff except for one thing:
2
You have to wait 5 days before the product hardens and you can use your sink! again! The instructions are deceptive because they say " Wait 5 days before cleaning with abrasive cleaners." But that implies it is OK to touch the repair after about 45 minutes, which is not true ;~)
1
I bought the porcelain chip fix follow the directions to the letter and get directions stated let stand for 1 hour at room temp to thicken let me tell you one thing it was so hard when I did get it out of the container to brush it onto the tub it was thick excessively thick I'd rather not buy this product again I just wasted my money on it,
Not ready for prime time.
1
I followed the instructions and it has been 48 hours and it is still sticky and has not set up. What do I do?
Homax quality control must be horrible!
1
Same problem as most reviewers with low ratings: product does not harden. I had two packages. I exchanged one package because it had about half as much hardener as the other. Calculated the volume of hardener & it was about right. Mixed and applied per instructions and after a week, it looks great, but is quite soft and very sticky. I'll try some other product.
Poor Product
1
I am a boat builder had have used many two-part epoxy compounds. I know to follow the directions exactly. This product never hardened after several days. I am impressed, however, in that Homax actually responds to these postings. This is almost unheard of today.
some batches don't harden
1
In doing some extensive patching, I bought (4) repair kits. First worked great, second worked great. I mixed the last two at the same time, keeping them separated in their (provided) mixing container. Neither hardened. This was 1 day apart, same bathtub, same house temp, prepped entire bathtub the same before starting. Scraped off the sticky product with putty knife and laquer thinner, tried again with a newly purchased kit. Same problem. Even tried a hair dryer. I liked the old two part epoxy large repair kit of years ago, it worked great. This is a quality control problem, not a product problem.
Tacky after 48 hours and does not match color
1
I purchase the chip repair and I used the original Homax tough tile a year ago and was very please buy am not please with the chip repair. It is still tacky after 48 hours and the color doesn’t match, which I had thought it would since I used the white homecoming refinishing kit. Please advise how to get the tackiness to hardened.

Porcelain Chip Fix, White

Item #2164


$8.24

Free Shipping

On All Orders

Quantity Discounts

4-8 $6.29 | 9+ $5.99 | High Volume


Description

Homax Porcelain Chip Fix repairs unsightly chips and  scratches on porcelain coated metal, ceramic and enamel. Two-part epoxy and self-leveling formula produces a high gloss, porcelain-like finish. Easy-to-use .Contains 1 vial of epoxy (.12 fl. oz.) and 1 vial of hardener (.06 fl. oz.). White.

Details

Directions

Reviews

Details

Chips or scratches in your kitchen or bathroom fixtures are unsightly, and make a beautiful surface look old and worn-out.

Homax Porcelain Chip Fix repairs the damaged surfaces of your sinks, tubs and tile. The easy-to-use two-part epoxy works on porcelain coated metals, ceramic and enamel surfaces. The self-leveling formula produces a high gloss, lustrous, porcelain-like finish. Use Homax Porcelain Chip Fix to fill and repair unsightly chips and scratches.

  • Fill and repair chips and scratches
  • Two-part epoxy
  • Self-leveling formula produces a durable, high-gloss, porcelain-like finish
  • Matches existing surface
  • Easy-to-apply
  • Works on porcelain coated metals, ceramic and enamel
  • Use on sinks, tubs, tile
  • Contains 1 vial of epoxy (.12 fl. oz.) and 1 vial of hardener (.06 fl. oz.)
  • White

Repairing unsightly porcelain chips is easy with Homax® Porcelain Chip Fix. Your porcelain will look almost as good as new!

Where To Use

Homax Porcelain Chip Fix repairs unsightly chips and scratches on sinks, tubs and tile.

Surfaces

Homax Porcelain Chip Fix can be used to fill and repair chips on porcelain coated metal, ceramic and enamel surfaces.

This product cannot ship to Hawaii or Alaska.

Directions

Surface Preparation: Sand chip to smooth edges.  Clean surface and rinse thoroughly to ensure proper adhesion. Allow to dry.

Epoxy Preparation: Shake vials before use. Empty contents into included mixing tray (Plastic Package). Use stir stick or toothpick to ensure contents of both vials are completely empty. (NOTE: VIAL 1 CONTAINS MORE WHITE EPOXY THAN OTHER VIAL WITH CLEAR HARDENER.) Mix thoroughly for 1 minute. Let stand for 1 hour at room temperature to thicken the mixture before applying.

To Apply: Apply with brush in 2-3 light thin coats. Wipe runs with damp paper towel. Allow 2 hours between coats. Store unused mixture in freezer between coats to prevent hardening. Remove 10 minutes before use. Clean brush with lacquer thinner before applying a new coat.

Working Time: Up to 90 minutes at room temperature. Up to 8 hours in freezer.

Cure Time: Allow 24-48 hours before use. Allow 5 days cure time before submersion or cleaning.

Cleaning: Wait 5 days prior to cleaning with a non-abrasive cleaner.

 WARNING: Reproductive Harm - www.P65Warnings.ca.gov.

WARNING! FLAMMABLE LIQUID. HARMFUL IF INHALED. MAY CAUSE CENTRAL NERVOUS SYSTEM EFFECTS, INCLUDING DIZZINESS, HEADACHE OR NAUSEA. CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION. MAY CAUSE ALLERGIC SKIN REACTION. VAPORS MAY CATCH FIRE.

Reviews