0 0 48.99 New USD Homax PPG Arch Coatings Homax® Tough As Tile® Spray On Tub, Sink & Tile Refinishing Kit - White Model: 386589 Product ID: 386589 Homax Tough as Tile Tub & Sink Spray-On Epoxy Refinishing Kit provides everything you need to restore your tub or sink to like-new condition with a glossy, protective finish. Great for surfaces subject to severe & frequent washing including fiberglass, porcelain, glazed ceramic tile, countertop laminate. Covers one (1) standard tub or two (2) sinks. 386589
Followed directions and it did not work
2
I bought this last week and followed the instructions. I let the product cure for 72 hours and last nigh when my soon took a bath, it started to bubble up everywhere on the bottom of the tub. The sides are fine, just the bottom. I feel like I wasted my time and money on this product. Guess I should have read the reviews before I bought it.
2
Spray version purchased and after shaking can neither can will work..pulled if nozzles and put back on and I STILL cannot get cans to spray the paint.
Disappointed with spray version
2
I had great luck with the brush version of this on my tub a couple years ago. Started renovating another bathroom that had a one piece tub and tub surround. The store only had the spray on version in stock. Spray version does not cover as well and left many areas too light and drips that are hard to see in bright lights. Paid for two kits already...and will need to find the brush version now to correct the issues. So much for a quick fix to cover the ugly blue...
I'll be dusting for years.
1
Finished the upstairs bathroom to walk downstairs and see that everything was coated in a white dust. Also the tub turned out splotchy as a dalmatian. Thanks Homax.
Do not buy
1
I spent 3 hours prepping my tub. Followed the instructions and applied more than 10 coats and it still did not cover. UGH! Yellowish blotches and matte finish, NOT HIGH GLOSS.
Cracked
1
I bought the kit, read the instructions and followed all the details in the box. I also used etching cream to create a porous surface, I cleaned the tub with water and soap and wiped it off with denatured alcohol. I let it dry for an hour or so, and stared spraying. It only lasted a week or so when I noticed some cracks even though i waited 72 hours prior to use it. The shower curtain started to get glued on the tub wall, discoloration started to appear and the cracks getting bigger. Thank God the stripper worked like a dream!. I have contacted a professional tub refinisher and he told me the reason why the product didn’t work, he said that before spraying I should’ve used a heat gun to heat all the tub surface because steel tubs tend to store humidity and stay cold. I really would’ve appreciated that important detail to be included in the manual. Thanks! Not mad but frustrated, but happy that the stripper removed the paint like oatmeal

Homax® Tough As Tile® Spray On Tub, Sink & Tile Refinishing Kit - White

Item #386589


$48.99

Free Shipping

On All Orders

Quantity Discounts

4-8 $39.89 | 9+ $37.99 | High Volume


Description

Our specially formulated One Part TOUGH AS TILE® Finish provides a durable, protective finish that remains beautiful for years. Refinish or re-color your tub, sink or tile, while eliminating the time, hassle and expense of a complete bathroom remodel. Our self-leveling finish refreshes your surface to a smooth, high-gloss look, which breathes new life into your tired tub, sink or tile. 

Details

Directions

Reviews

Details

Homax® Tough as Tile® Tub & Sink Refinishing Kit provides everything you need to restore your tub, sink or tile to a like-new condition. It is specially formulated to provide a durable, glossy and protective finish that remains beautiful for years.  No need to hire a contractor or replace expensive fixtures.  Homax Tough as Tile® works on ceramic, porcelain, fiberglass, acrylic, laminate, china and enamel-coated steel.  

Why Choose Homax Tough as Tile® Spray–On Tub, Bathroom Sink, and Tile Refinishing Kit​?
  • Provides a hard, protective finish that remains beautiful over time
  • Convenient spray-on application
  • One-part, no mixing required
  • Self-leveling finish leaves a smooth, porcelain-like surface
  • Advanced technology, superior adhesion
  • Economical alternative to tub, bathroom sink or tile replacement
  • White
  • Covers one (1) standard tub or two (2) bathroom sinks
Where To Use:

Use On: Bathtubs, Bathroom Sinks, Ceramic Tile, Porcelain, Fiberglass & Showers.

Works On: Fiberglass, Porcelain, Glazed Ceramic Tile and Acrylic Composite.

Coverage: 44 - 52 sq. feet -- equivalent to one standard size tub or two bathroom sinks.

Kit Includes:
  • (2) 16 oz. (454 g) Tough as Tile® Finish Cans
  • (2) Pads of Homax® Extra Fine Steel Wool
  • (1) Packet 1 oz. (28 g) Surface Preparation Cleaner
  • (1) Pair of Nitrile Gloves
Supplies Needed:
  • Plastic Drop Cloth
  • Painters Masking Tape
  • Homax® Porcelain Chip Fix(if repair of chips or cracks is needed)
  • Bucket
  • Cleaning Sponge
  • Paper Towels
  • Lacquer Thinner
  • Respirator (NIOSH Approved - Organic Vapor)
  • Protective Eyewear
Click here for how-to instructions

This product cannot ship to Hawaii or Alaska.

Directions

SEE INSTRUCTION MANUAL INCLUDED WITH PRODUCT.
READ ALL WARNINGS AND CAUTIONS PRIOR TO USE.

NOTE:
Covers one (1) standard tub or two (2) bathroom sinks

KIT INCLUDES:
  • (2) 16 oz (454 g) Tough as Tile® Finish Cans
  • (2) Pads of Homax® Extra Fine Steel Wool
  • (1) Packet 1 oz (28 g) Surface Preparation Cleaner
  • (1) Pair of Nitrile Gloves
SUPPLIES NEEDED:
  • Plastic Drop Cloth
  • Painters Masking Tape
  • Homax® Porcelain Chip Fix (if repair of chips or cracks is needed)
  • Bucket
  • Cleaning Sponge
  • Paper Towels
  • Lacquer Thinner
  • Respirator (NIOSH Approved - Organic Vapor)
  • Protective Eyewear
DANGER! Paint Component Contains: Acetone (67-64-1), Epoxy Resin (CAS# Unknown), Titanium Dioxide (CAS# 13463-67-7), Xylene (1330-20-7), Methyl Ethyl Ketone (78-93-3), n-Butyl Acetate (123-86-4), Petroleum Distillates (64745-89-8), n-Butanol (71-36-3) and Ethylbenzene (100-41-4).

Surface Preparation Packet Component Contains: Sodium Sesquicarbonate (533-96-0), Sodium Metasilicate (6834-92-0) and Tetrasodium EDTA (64-02-8).

EXTREMELY FLAMMABLE: Keep away from heat, sparks and flame. Do not smoke. Vapors may ignite explosively. Extinguish all flames, burners, stoves, heaters and pilot lights and disconnect all electrical motors and appliances before use and until all vapors are gone. Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation.

CONTENTS UNDER PRESSURE: Do not puncture or incinerate (burn) container. Do not expose to heat or store at temperatures above 120º F. Avoid prolonged exposure to sunlight or heat from radiators, stoves, hot water and other heat sources that may cause bursting.

VAPOR HARMFUL: May cause central nervous system effects, including dizziness, headache or nausea. Causes eye, skin and respiratory tract irritation. May cause allergic skin reaction. Do not breathe vapor or spray mist. Avoid eye and skin contact. Use with adequate ventilation. Prevent build-up of vapors by opening windows and doors to achieve cross-ventilation. Do not use in enclosed or confined spaces. Where adequate ventilation cannot be guaranteed, an appropriate and properly fitted NIOSH approved respirator should be used, but should only be used in accordance with manufacturer’s directions for respirator use.

NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal.

FIRST AID: In case of skin contact, wash thoroughly with soap and water. If any product remains, gently rub petroleum jelly, vegetable or mineral/baby oil onto skin, then wash again with soap and water. Repeated applications may be needed. Remove contaminated clothing. For eye contact, flush immediately with large amounts of water, for at least 15 minutes. Obtain emergency medical treatment. If swallowed, obtain medical treatment immediately. If inhalation causes physical discomfort, remove to fresh air. If discomfort persists or any breathing difficulty occurs, get medical help.

WARNING: This product contains a chemical known to the State of California to cause cancer, birth defects or other reproductive harm.

WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

VOC: Non-Flat Paint Product, PWMIR < 1.40, < 60% by weight

Reviews