Aerosol Wall Texture, Oil-Based Orange Peel, 20oz
Item #4055-06
Description
Homax® Orange Peel Oil Based Texture is the fastest way to patch “orange peel” drywall textures. Variations in the orange peel texture (also called splatter or eggshell) help hide surface imperfections, while reflecting light and adding interest to a room. Our oil-based texture excels at replicating a wide range of orange peel texture patterns so you can get professional results fast. Drying in as little as five minutes, it can be painted over to blend into the surrounding surface.Related Products
Details
Directions
Reviews
Details
Damaged orange peel textured walls can be a challenge to repair. Matching the existing texture is critical to achieving a professional, flawless finish. Homax makes it easier with our popular aerosol texture repair products.
Homax® Orange Peel Oil Based Texture is the fastest way to patch “orange peel” drywall textures. Variations in the orange peel texture (also called splatter or eggshell) help hide surface imperfections, while reflecting light and adding interest to a room. Our oil-based texture excels at replicating a wide range of orange peel texture patterns so you can get professional results fast. Drying in as little as five minutes, it can be painted over to blend into the surrounding surface.
- Match existing interior wall texture
- No more bald spots
- Convenient aerosol application
- Just shake the can, adjust the nozzle and spray
- Adjusts to spray fine to heavy orange peel wall textures
- Fast drying, oil-based formula
- Covers up to 110 sq. ft.
- 20 oz.
Pros: No hopper gun. No mixing. No compressor. Move on to your next job quickly. Save time and money.
DIYers: No need to call in an expensive contractor. Homax gives you the power to repair your own wall texture.
This product cannot ship to Hawaii or Alaska.
Directions
Homax® Orange Peel Oil Based Texture is the fastest way to patch “orange peel” drywall textures. To achieve the best results, please read the following directions carefully before you begin your wall repair project.
VENTILATE AREA WELL. PROTECT SURROUNDING AREA FROM OVERSPRAY. DO NOT SPRAY ON CLOTHING, FURNITURE OR CARPET.
- Oil-based, use paint thinner for clean up.
- Sprays best between 68˚ F and 72˚ F.
- For a finer texture, run can under warm water.
DIRECTIONS FOR USE: MAKE ANY NECESSARY WALL REPAIRS BEFORE APPLYING. FOR BEST RESULTS, PRIME/SEAL AREA BEFORE AND AFTER APPLYING TEXTURE.
- Shake can vigorously for one minute prior to use.
- Twist off safety tab from nozzle.
- Always practice spraying on cardboard or scrap drywall to determine preferred pattern. Pointing away from face, adjust dial to desired pattern. CLOCKWISE for FINE. STRAIGHT UP for MEDIUM. COUNTER CLOCKWISE for HEAVY.
- Spray at a distance of 24”-36” from wall using a circular, or quick sweeping motion. Apply in random pattern, covering only 80-90% of surface. Shake can occasionally throughout use. DRY TIME: Allow to dry 5-30 minutes (depending on heaviness of texture) before priming and painting. Heavier textures may require a longer dry time.
- To store, clear nozzle by turning can upside and spraying until texture is cleared.
DANGER! Contains Nepheline Syenite, Calcium Silicate, Toluene, Acetone, Xylene, Titanium Dioxide, Ethylbenzene and Propane/Isobutane blend (propellant). Vapors may cause flash fire. Keep away from heat, sparks and flame. Extinguish all flames and sources of ignition during use and until all vapors are gone. Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation. May affect the brain or nervous system causing dizziness, headache or nausea.
NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Store upright in a cool, dry place. Avoid prolonged exposure to sunlight and other heat sources that may cause bursting. Do not puncture, incinerate, burn or store above 120°F. Use with adequate ventilation. Avoid breathing vapor and spray mist. Avoid contact with eyes and skin. Wear safety glasses or goggles and gloves. FIRST AID: If swallowed, do not induce vomiting. Get medical attention immediately. For eye contact, flush thoroughly with water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. If inhaled, remove person to fresh air. If breathing does not improve, get medical attention.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
WARNING: If you scrap, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Hotline or 1-800-424-LEAD or log onto www.epa.gov/lead.