0 0 14.69 New USD Homax PPG Arch Coatings Aerosol Wall Texture, Oil-Based Orange Peel, 10 oz Model: 4050-06 Product ID: 4050-06 Homax Orange Peel Oil Based Wall Texture is the fastest way to patch “orange peel” drywall textures. Variations in orange peel texture (also called splatter or eggshell) help hide surface imperfections, while reflecting light and adding interest to a room. Our oil-based wall texture formula excels at replicating orange peel texture patterns so you can get professional results fast. Drying in as little as five minutes, it can be painted over to blend into the surrounding surface. 4050-06

Aerosol Wall Texture, Oil-Based Orange Peel, 10 oz

Item #4050-06



Description

Homax® Orange Peel Oil Based Wall Texture is the fastest way to patch “orange peel” drywall textures.  Variations in orange peel texture (also called splatter or eggshell) help hide surface imperfections, while reflecting light and adding interest to a room. Our oil-based wall texture formula excels at replicating orange peel texture patterns so you can get professional results fast. Drying in as little as five minutes, it can be painted over to blend into the surrounding surface.

Details

Directions

Reviews

Details

The original oil-based spray texture is the fastest way to patch “orange peel” and splatter drywall textures. The ultra-fast drying texture excels at replicating superfine orange peel finishes and is preferred by both contractors and DIYers who seek fast job completion.

• Oil-based, Dries in 5 minutes
• Adjusts to spray fine to heavy orange peel textures
• Covers up to 50 sq. ft.

This product cannot ship to Hawaii or Alaska.

Directions

Homax® Orange Peel Oil Based Texture is the fastest way to patch “orange peel” drywall textures. To achieve the best results, please read the following directions carefully before you begin your wall repair project.

VENTILATE AREA WELL. PROTECT SURROUNDING AREA FROM OVERSPRAY. DO NOT SPRAY ON CLOTHING, FURNITURE OR CARPET.

  • Oil-based, use paint thinner for clean up.
  • Sprays best between 68˚ F and 72˚ F.
  • For a finer texture, run can under warm water.

DIRECTIONS FOR USE: MAKE ANY NECESSARY WALL REPAIRS BEFORE APPLYING. FOR BEST RESULTS, PRIME/SEAL AREA BEFORE AND AFTER APPLYING TEXTURE.

 

  1. Shake can vigorously for one minute prior to use.
  2. Twist off safety tab from nozzle.
  3. Always practice spraying on cardboard or scrap drywall to determine preferred pattern. Pointing away from face, adjust dial to desired pattern. CLOCKWISE for FINE. STRAIGHT UP for MEDIUM. COUNTER CLOCKWISE for HEAVY.
  4. Spray at a distance of 24”-36” from wall using a circular, or quick sweeping motion. Apply in random pattern, covering only 80-90% of surface. Shake can occasionally throughout use. DRY TIME: Allow to dry 5-30 minutes (depending on heaviness of texture) before priming and painting. Heavier textures may require a longer dry time.
  5. To store, clear nozzle by turning can upside and spraying until texture is cleared.

DANGER! Contains Nepheline Syenite, Calcium Silicate, Toluene, Acetone, Xylene, Titanium Dioxide, Ethylbenzene and Propane/Isobutane blend (propellant). Vapors may cause flash fire. Keep away from heat, sparks and flame. Extinguish all flames and sources of ignition during use and until all vapors are gone. Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation. May affect the brain or nervous system causing dizziness, headache or nausea.

NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Store upright in a cool, dry place. Avoid prolonged exposure to sunlight and other heat sources that may cause bursting. Do not puncture, incinerate, burn or store above 120°F. Use with adequate ventilation. Avoid breathing vapor and spray mist. Avoid contact with eyes and skin. Wear safety glasses or goggles and gloves. FIRST AID: If swallowed, do not induce vomiting. Get medical attention immediately. For eye contact, flush thoroughly with water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. If inhaled, remove person to fresh air. If breathing does not improve, get medical attention.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

WARNING: If you scrap, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Hotline or 1-800-424-LEAD or log onto www.epa.gov/lead.

Reviews