Instructions
Because the grout coating bonds to porous surfaces, do not use on any unglazed tiles, slate, concrete block or porous marble. Always test in an inconspicuous area to ensure removal.
- Clean the tile and grout.
- Shake well with dome on (for 4.3 oz. applicator bottle) or with cap on.
- Invert bottle, press applicator directly to grout line. Apply pressure to begin liquid flow. Apply liberally. (For 8 oz and 32 oz. bottles, use a foam brush, latex paint brush, air brush, squeegee, or other means to apply smooth even coat).
- Smooth excess over tile surface with tip of applicator.
- Allow to dry 4 hours or longer. Wipe down with damp cloth or sponge, avoiding excessive pressure directly on grout lines.
- Polish with dry cloth or paper towel.