Floor Sealer & Finish
Instructions
- Allow new grout installations to dry 2 weeks before application.
- Clean surface with Tile Guard Tile and Grout Cleaner or No Rinse Neutral Cleaner on marble, slate or other very porous surfaces.
- This product may enhance the color of the surface. To test, apply a small amount in an inconspicuous area and allow to dry 20 – 30 minutes.
- Mix gently before using. Using a short string mop, sponge or foam paint brush apply a thin uniform coat over the entire surface. Do not allow to pool.
- On porous surfaces, to achieve a glossier finish, two or more coats may be required. Wait 20 – 30 minutes between coats.
- Lightly buff to increase shine. Allow to cure 48 hours before cleaning with hot water, cleaners, or abrasive material.