Instructions
Surface Preparation: Surface must be clean, free of dirt, dust, mold, mildew, peeling paint, or loose texture. If washing is needed, make sure surface is dry before applying.
- Shake can vigorously for 1 minute after mixing ball rattles. Shake during application.
- Remove nozzle and rotate, directing nozzle toward spraying surface. Replace nozzle.
- Hold can upright approximately 12” from surface area.
- Spray lightly. For best results apply 2-3 light coats 10 minutes apart.
Drytime: Dries to touch in 10 minutes. Can be painted or textured 30 minutes after last application.
Clean-Up: Clean nozzle immediately after use by turning can upside down and spraying until clear. Clean up any dried paint using paint thinner.