Instructions
Use Homax Orange Peel Spray Texture to match existing drywall textures or to apply new texture to smooth walls. Color-changing formula goes on blue for high visibility and easy pattern reproduction on light colored surfaces. New formula dries 50% faster and signals it is paint-ready when white.
For FINER orange peel, can may be heated by running under warm water for 2 minutes.
Protect surrounding area from overspray.
DO NOT SPRAY ON CLOTHING, FURNITURE OR CARPET. VENTILATE AREA WELL.
• Use warm water for clean up.
• Sprays best at room temperature.
• If pressure is too low, place can in warm water for two minutes, if pressure is too high, place can in cold water.
DIRECTIONS FOR USE: MAKE ANY NECESSARY WALL REPAIRS BEFORE APPLYING. FOR BEST RESULTS, PRIME / SEAL AREA BEFORE AND AFTER APPLYING TEXTURE.
Cover surrounding items to protect from overspray.
- Shake can vigorously for one minute.
- Twist off safety tab from nozzle.
- Pointing away from face, turn dial
• CLOCKWISE for FINE ORANGE PEEL
- If fine pattern seems to heavy, rotate dial back and forth multiple times, then back to fine setting.
• COUNTERCLOCKWISE for HEAVY SPLATTER
Spray at arms length, or 24-36" from surface - Always practice spraying on cardboard or scrap drywall to determine preferred pattern. Spray using a circular, or sweeping motion. (Texture should cover less than 80% of surface.)
- After use, clear nozzle by turning can upside down and spraying until texture is cleared.
DRY TIME: Texture can be painted when white, signaling it is dry. Heavier textures will require longer dry times than fine textures.