Troubleshooting
My can sprayed out a “blob” of texture when I first depressed the nozzle?
Sometimes this occurs when the can is not shaken well enough. This should clear, and the rest of your material should be fine.
Not spraying:
Not spraying, just oozing: Remember to shake can vigorously for 1 minute before use. You should hear the ball rattle inside.
My can will not spray at all.
Try shaking well or heating up.
My can sprays out in a stream, and doesn’t atomize like it should?
Try heating it up by running it under warm water. It might be too cool to atomize.
I am having trouble getting a fine orange peel pattern.
Turn the dial back and forth a couple times, then back to fine. Try Spraying again. If this does not work, try running warm water over the can.
I can not get as heavy a pattern as I would like.
Make sure dial is set to heavy (counterclockwise). Also, try running cold water over can for heaviest pattern.
The stem of my nozzle looks bent or deformed, and I can’t get it back in the can.
It may have been damaged when it was inserted in the can. Return to the store where it was originally purchased.