Frequently Asked Questions
What is the Safety Tab for?
The safety tab is designed to help prevent discharging in the store. It is simply twisted off by the end user before use.
What if my can doesn’t have a safety tab?
Most likely this means that someone has torn it off already. No worries. The can should still spray just fine.
How many patterns does the New Adjustable Nozzle Spray?
We feel the new nozzle applies 5 distinguishable patterns, ranging from fine orange peel to heavy splatter. However, you can even spray a finer fine by running the can under warm water and coarser by running the can under cold water.
How do I clean out the nozzle after use?
Simply turn the can upside down and spray until material no longer discharges. The nozzle will be clear and ready to spray the next time you need to use the product.
What if the nozzle comes off the cradle?
Simply place the “dial” of the nozzle assembly back into the groove of the base and apply slight pressure to securely seat the stem into the hole. Be careful not to damage the stem.
Can I heat or cool the can to get a finer or heavier pattern?
Yes. Heating up the can in warm water will enhance the propellant, and spray a finer texture than a room temperature can, and a colder can will exhibit the opposite effect—a coarser spray.
What if my can doesn’t spray at all?
Be sure can is shaken very well—until ball rattles. Try to remove the nozzle, then replace and try again.
My can sprayed out a “blob” of texture when I first depressed the nozzle?
Sometimes this occurs when the can is not shaken well enough. This should clear, and the rest of your material should be fine.
My can sprays out in a stream, and doesn’t atomize like it should?
Try heating it up by running it under warm water. It might be too cool to atomize.
How much do I need to shake the can?
It is important to shake the can until you hear the ball rattle.
The stem of my nozzle looks bent or deformed, and I can’t get it back in the can.
It may have been damaged when it was inserted in the can. Return to the store where it was originally purchased.
My can will not spray at all.
Try shaking well or heating up.
Can I paint over the texture?
Yes. The Texture is meant to be painted over after it has dried.
Coverage:
#4091 - 10oz
Fine - Up to 50 sq. ft.
Medium - Approx. 35 sq. ft.
Heavy - Approx. 25 sq. ft.
Dry Time – 30 minutes
#4092 - 20oz
Fine - Up to 110 sq. ft.
Medium - Approx. 75 sq. ft.
Heavy - Approx. 60 sq. ft.
Dry Time – 30 minutes