Liquid Sander Paint Etch

Liquid Sander Paint Etch

Liquid Sander Paint Etch

Instructions

Always test first on surface not to be finished, as it will degloss most surfaces.

  1. This product is premixed but shake well before use. Wipe Liquid Sander Paint Etch on with a coarse cloth or brush (or steel wool on heavily soiled, waxed or rough surfaces).
  2. Let stand for a few minutes, then wipe off dust, dirt, wax or grease with a clean cloth.
  3. Refinish now or next week before surface becomes dirty or dusty again. If it does, rewipe with Liquid Sander Paint Etch and refinish. Antiquing products should be applied promptly after etching.

Storage: Close cap tightly and store in upright position after each use and before transporting.

Waste Disposal: Dispose of in compliance with local Government regulations.

Warnings:

  • Contains Organic Esters.
  • Avoid eye contact and prolonged skin contact. For eyes, flush with water for 15 minutes and call a physician.
  • If swallowed, do not induce vomiting. Call a physician.
  • Use with adequate ventilation.
  • Keep out of reach of children.