Instructions
Stir before using. Can be brushed or sprayed on. Trim should be clean, deglosssed and ready for painting. Mask & Seal will peel off glass and most, smooth uncoated flat metal surfaces or glossy painted trim.
- Brush on thick coat one inch wide to glass and onto edge of trim. Or spray entire window area.
- After Mask & Seal changes color from white to clear (approx. 30 minutes) apply paint (oil or latex) to trim and edge of glass to seal. Let paint dry.
- Notch and cut carefully along the edge of the trim.
- Peel paint off the glass now or within a month or two. Peels best when cool. Reapply if too thin to peel
- Apply only when surface temperature is between 40 degrees to 90 degrees F.
- Weatherproofing: Brush on two applications to edge of trim and paper can be stuck to Wet Mask & Seal around glass edge to protect from paint overspray. Do not stick to trim.
Clean-Up: Wash tools and hands with water.
Storage: Keep from freezing. Close container after each use.
Warnings:
- Do not take internally.
- Avoid prolonged contact with skin or breathing of spray mist.
- Keep out of reach of children.