Instructions
- Use protective gloves. Unscrew cap slowly so vapors can escape.
- Pour some remover into a wide-mouthed jar.
- With old or inexpensive new brush, flow on a thick coat in one direction.
- Allow to set 5-15 minutes or until surface is blistered.
- Remove finish with spatula, steel wool or cloth while surface is wet.
- Rub clean, let dry thoroughly and apply new finish.
To Remove Most Stains: After finish has been removed, apply a thin coat of Speedomatic, let set for 10-15 minutes, scrub wood with No. 2 steel wool.
Storage: Sore in a cool, dry place. High-quality removers are chemically active and may rust cans and leak after prolonged storage.