Skip to Content

HOMAX® TOUGH AS TILE® Tub Refinish Brush-On

Size

Each (EA), N/A, 21 oz/625 mL (EA)

Sheen

N/A, High Gloss, High gloss

Are you a pro? Use our new online ordering tool.
woman taping off wall for painting

Product Details

Our specially formulated One Part TOUGH AS TILE® Finish provides a durable, protective finish that remains beautiful for years. Refinish or re-color your tub, sink or tile, while eliminating the time, hassle and expense of a complete bathroom remodel. Our self-leveling finish refreshes your surface to a smooth, high-gloss look, which breathes new life into your tired tub, sink or tile.

Features:

  • Provides a hard, protective finish that remains beautiful over time
  • Simple brush-on application
  • One-part finish, no mixing required
  • Self-leveling finish leaves a smooth glossy porcelain-like surface
  • Economical alternative to tub, sink or tile replacement
  • Covers one (1) standard tub or two (2) sinks
  • Works On: Fiberglass, Porcelain, Glazed Ceramic Tile and Acrylic Composite.

Application Details

SEE INSTRUCTION MANUAL INCLUDED WITH PRODUCT.

READ ALL WARNINGS AND CAUTIONS PRIOR TO USE.


NOTE: Covers one (1) standard tub or two (2) bahtroom sinks


SUPPLIES NEEDED:

  • High Quality Polyester Bristle Brush
  • Plastic Drop Cloth
  • Painters Masking Tape
  • Homax® Porcelain Chip Fix (if repair of chips or cracks is needed)
  • Bucket
  • Cleaning Sponge
  • Paper Towels
  • Lacquer Thinner
  • Respirator (NIOSH Approved - Organic Vapor)
  • Protective Eyewear

DANGER: Flammable liquid or vapor. Harmful or fatal if swallowed. May cause central nervous system effects, including dizziness, headache or nausea. Causes eye, skin and respiratory tract irritation. May cause allergic skin reaction.


Paint Component Contains: Dipropylene Glycol Methyl Ether (CAS# 34590-94-8), n-Butyl Acetate (CAS#123-86-4), Petroleum Distillates (CAS# 64742-89-8), n-Butanol (CAS# 71-36-3), Xylene (CAS# 1330-20-7), Heavy Aromatic Solvent Naptha (CAS# 64742-94-5), Epoxy Resin (CAS# Unknown) and Titanium Dioxide (CAS# 13463-67-7)


Surface Preparation Packet Component Contains: Sodium Sesquicarbonate (CAS# 533-96-0), Sodium Metasilicate (CAS# 6834-92-0) and Tetrasodium EDTA (CAS# 64-02-8)


USE ONLY WITH ADEQUATE VENTILATION.


NOTICE: This product contains solvents. Reports have associated repeated and prolonged overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Keep away from heat, sparks and flame. Do not smoke. Vapors may ignite. Extinguish all flames, burners, stoves, heaters and pilot lights and disconnect all electrical motors and appliances before use and until all vapors are gone.


Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation. If sanding is done, wear a dust mask to avoiding breathing of sanding dust. Do not breathe vapors. Ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, leave the area. If properly used, a NIOSH respirator may offer additional protection. Obtain professional advice before using. Prevent contact with eyes and skin. Wear safety glasses or goggles and gloves. Close container after each use.


KEEP OUT OF REACH OF CHILDREN.


FIRST AID: In cases of skin contact, wash thoroughly with soap and water. If any product remains, gently rub petroleum jelly, vegetable oil or baby oil onto skin, then wash again with soap and water. Repeated applications may be needed. Remove contaminated clothing. For eye contact, flush immediately with large amounts of water for at least 15 minutes. Obtain medical treatment. If swallowed, obtain medical treatment immediately. If inhalation causes physical discomfort, remove to fresh air. If discomfort persists or breathing difficulty occurs, get medical help.


WARNING: Cancer - www.P65Warnings.ca.gov


VOC Content: 508 g/L (4.24 lbs/gal)

Looking for a datasheet? Access PPG's full datasheet portal here or visit https://products.ppgac.com/

Code Finish Base Sizes Download
12-1121-A N/A Ready Mix White Each (EA)
2106 High Gloss Ready Mix White N/A N/A
2166E High Gloss Ready Mix White N/A N/A
3145 High Gloss READY MIX WHITE Each (EA) N/A
3152 High gloss Ready Mix Custom Color 21 oz/625 mL (EA) N/A
3154 High gloss Ready Mix Custom Color Each (EA) N/A
3158 High gloss Ready Mix White Each (EA)
33610 High Gloss Ready Mix White N/A
33611 High Gloss Ready Mix Custom Color N/A
33612 High Gloss Ready Mix White N/A
4803 High Gloss Ready Mix White N/A